index (arbitrarily chosen to be the concept index). This file documents Texinfo, a documentation system that can produce both on-line information and a printed manual from a single source file. Copyright (C) 1988, 90, 91, 92, 93, 95, 1996 Free Software Foundation, Inc. This is the second edition of the Texinfo documentation, and is consistent with version 2 of `texinfo.tex'. Permission is granted to make and distribute verbatim copies of this manual provided the copyright notice and this permission notice are preserved on all copies. Permission is granted to copy and distribute modified versions of this manual under the conditions for verbatim copying, provided that the entire resulting derived work is distributed under the terms of a permission notice identical to this one. Permission is granted to copy and distribute translations of this manual into another language, under the above conditions for modified versions, except that this permission notice may be stated in a translation approved by the Free Software Foundation. Texinfo ******* Texinfo is a documentation system that uses a single source file to produce both on-line information and printed output. The first part of this master menu lists the major nodes in this Info document, including the @-command and concept indices. The rest of the menu lists all the lower level nodes in the document. This is Edition 2.23 of the Texinfo documentation, 1 October 1996, for Texinfo Version Three. Texinfo Copying Conditions ************************** The programs currently being distributed that relate to Texinfo include portions of GNU Emacs, plus other separate programs (including `makeinfo', `info', `texindex', and `texinfo.tex'). These programs are "free"; this means that everyone is free to use them and free to redistribute them on a free basis. The Texinfo-related programs are not in the public domain; they are copyrighted and there are restrictions on their distribution, but these restrictions are designed to permit everything that a good cooperating citizen would want to do. What is not allowed is to try to prevent others from further sharing any version of these programs that they might get from you. Specifically, we want to make sure that you have the right to give away copies of the programs that relate to Texinfo, that you receive source code or else can get it if you want it, that you can change these programs or use pieces of them in new free programs, and that you know you can do these things. To make sure that everyone has such rights, we have to forbid you to deprive anyone else of these rights. For example, if you distribute copies of the Texinfo related programs, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must tell them their rights. Also, for our own protection, we must make certain that everyone finds out that there is no warranty for the programs that relate to Texinfo. If these programs are modified by someone else and passed on, we want their recipients to know that what they have is not what we distributed, so that any problems introduced by others will not reflect on our reputation. The precise conditions of the licenses for the programs currently being distributed that relate to Texinfo are found in the General Public Licenses that accompany them. Overview of Texinfo ******************* "Texinfo"(1) (*note Overview-Footnotes::) is a documentation system that uses a single source file to produce both on-line information and printed output. This means that instead of writing two different documents, one for the on-line help or other on-line information and the other for a typeset manual or other printed work, you need write only one document. When the work is revised, you need revise only one document. (You can read the on-line information, known as an "Info file", with an Info documentation-reading program.) (1) Note that the first syllable of "Texinfo" is pronounced like "speck", not "hex". This odd pronunciation is derived from, but is not the same as, the pronunciation of TeX. In the word TeX, the `X' is actually the Greek letter "chi" rather than the English letter "ex". Pronounce TeX as if the `X' were the last sound in the name `Bach'; but pronounce Texinfo as if the `x' were a `k'. Spell "Texinfo" with a capital "T" and write the other letters in lower case. Using Texinfo ============= Using Texinfo, you can create a printed document with the normal features of a book, including chapters, sections, cross references, and indices. From the same Texinfo source file, you can create a menu-driven, on-line Info file with nodes, menus, cross references, and indices. You can, if you wish, make the chapters and sections of the printed document correspond to the nodes of the on-line information; and you use the same cross references and indices for both the Info file and the printed work. `The GNU Emacs Manual' is a good example of a Texinfo file, as is this manual. To make a printed document, you process a Texinfo source file with the TeX typesetting program. This creates a DVI file that you can typeset and print as a book or report. (Note that the Texinfo language is completely different from TeX's usual language, plain TeX.) If you do not have TeX, but do have `troff' or `nroff', you can use the `texi2roff' program instead. To make an Info file, you process a Texinfo source file with the `makeinfo' utility or Emacs's `texinfo-format-buffer' command; this creates an Info file that you can install on-line. TeX and `texi2roff' work with many types of printer; similarly, Info works with almost every type of computer terminal. This power makes Texinfo a general purpose system, but brings with it a constraint, which is that a Texinfo file may contain only the customary "typewriter" characters (letters, numbers, spaces, and punctuation marks) but no special graphics. A Texinfo file is a plain ASCII file containing text and "@-commands" (words preceded by an `@') that tell the typesetting and formatting programs what to do. You may edit a Texinfo file with any text editor; but it is especially convenient to use GNU Emacs since that editor has a special mode, called Texinfo mode, that provides various Texinfo-related features. (*Note Texinfo Mode::.) Before writing a Texinfo source file, you should become familiar with the Info documentation reading program and learn about nodes, menus, cross references, and the rest. (*note info: (info)Top, for more information.) You can use Texinfo to create both on-line help and printed manuals; moreover, Texinfo is freely redistributable. For these reasons, Texinfo is the format in which documentation for GNU utilities and libraries is written. Info files ========== An Info file is a Texinfo file formatted so that the Info documentation reading program can operate on it. (`makeinfo' and `texinfo-format-buffer' are two commands that convert a Texinfo file into an Info file.) Info files are divided into pieces called "nodes", each of which contains the discussion of one topic. Each node has a name, and contains both text for the user to read and pointers to other nodes, which are identified by their names. The Info program displays one node at a time, and provides commands with which the user can move to other related nodes. *note info: (info)Top, for more information about using Info. Each node of an Info file may have any number of child nodes that describe subtopics of the node's topic. The names of child nodes are listed in a "menu" within the parent node; this allows you to use certain Info commands to move to one of the child nodes. Generally, an Info file is organized like a book. If a node is at the logical level of a chapter, its child nodes are at the level of sections; likewise, the child nodes of sections are at the level of subsections. All the children of any one parent are linked together in a bidirectional chain of `Next' and `Previous' pointers. The `Next' pointer provides a link to the next section, and the `Previous' pointer provides a link to the previous section. This means that all the nodes that are at the level of sections within a chapter are linked together. Normally the order in this chain is the same as the order of the children in the parent's menu. Each child node records the parent node name as its `Up' pointer. The last child has no `Next' pointer, and the first child has the parent both as its `Previous' and as its `Up' pointer.(1) (*note Info Files-Footnotes::) The book-like structuring of an Info file into nodes that correspond to chapters, sections, and the like is a matter of convention, not a requirement. The `Up', `Previous', and `Next' pointers of a node can point to any other nodes, and a menu can contain any other nodes. Thus, the node structure can be any directed graph. But it is usually more comprehensible to follow a structure that corresponds to the structure of chapters and sections in a printed book or report. In addition to menus and to `Next', `Previous', and `Up' pointers, Info provides pointers of another kind, called references, that can be sprinkled throughout the text. This is usually the best way to represent links that do not fit a hierarchical structure. Usually, you will design a document so that its nodes match the structure of chapters and sections in the printed output. But there are times when this is not right for the material being discussed. Therefore, Texinfo uses separate commands to specify the node structure for the Info file and the section structure for the printed output. Generally, you enter an Info file through a node that by convention is called `Top'. This node normally contains just a brief summary of the file's purpose, and a large menu through which the rest of the file is reached. From this node, you can either traverse the file systematically by going from node to node, or you can go to a specific node listed in the main menu, or you can search the index menus and then go directly to the node that has the information you want. If you want to read through an Info file in sequence, as if it were a printed manual, you can get the whole file with the advanced Info command `g* '. (*note Advanced Info commands: (info)Expert.) The `dir' file in the `info' directory serves as the departure point for the whole Info system. From it, you can reach the `Top' nodes of each of the documents in a complete Info system. (1) In some documents, the first child has no `Previous' pointer. Occasionally, the last child has the node name of the next following higher level node as its `Next' pointer. Printed Books ============= A Texinfo file can be formatted and typeset as a printed book or manual. To do this, you need TeX, a powerful, sophisticated typesetting program written by Donald Knuth.(1) (*note Printed Books-Footnotes::) A Texinfo-based book is similar to any other typeset, printed work: it can have a title page, copyright page, table of contents, and preface, as well as chapters, numbered or unnumbered sections and subsections, page headers, cross references, footnotes, and indices. You can use Texinfo to write a book without ever having the intention of converting it into on-line information. You can use Texinfo for writing a printed novel, and even to write a printed memo, although this latter application is not recommended since electronic mail is so much easier. TeX is a general purpose typesetting program. Texinfo provides a file called `texinfo.tex' that contains information (definitions or "macros") that TeX uses when it typesets a Texinfo file. (`texinfo.tex' tells TeX how to convert the Texinfo @-commands to TeX commands, which TeX can then process to create the typeset document.) `texinfo.tex' contains the specifications for printing a document. Most often, documents are printed on 8.5 inch by 11 inch pages (216mm by 280mm; this is the default size), but you can also print for 7 inch by 9.25 inch pages (178mm by 235mm; the `@smallbook' size) or on European A4 size paper (`@afourpaper'). (*Note Printing "Small" Books: smallbook. Also, see *Note Printing on A4 Paper: A4 Paper.) By changing the parameters in `texinfo.tex', you can change the size of the printed document. In addition, you can change the style in which the printed document is formatted; for example, you can change the sizes and fonts used, the amount of indentation for each paragraph, the degree to which words are hyphenated, and the like. By changing the specifications, you can make a book look dignified, old and serious, or light-hearted, young and cheery. TeX is freely distributable. It is written in a dialect of Pascal called WEB and can be compiled either in Pascal or (by using a conversion program that comes with the TeX distribution) in C. (*Note TeX Mode: (emacs)TeX Mode, for information about TeX.) TeX is very powerful and has a great many features. Because a Texinfo file must be able to present information both on a character-only terminal in Info form and in a typeset book, the formatting commands that Texinfo supports are necessarily limited. *Note How to Obtain TeX: Obtaining TeX. (1) You can also use the `texi2roff' program if you do not have TeX; since Texinfo is designed for use with TeX, `texi2roff' is not described here. `texi2roff' is part of the standard GNU distribution. @-commands ========== In a Texinfo file, the commands that tell TeX how to typeset the printed manual and tell `makeinfo' and `texinfo-format-buffer' how to create an Info file are preceded by `@'; they are called "@-commands". For example, `@node' is the command to indicate a node and `@chapter' is the command to indicate the start of a chapter. *Please note:* All the @-commands, with the exception of the `@TeX{}' command, must be written entirely in lower case. The Texinfo @-commands are a strictly limited set of constructs. The strict limits make it possible for Texinfo files to be understood both by TeX and by the code that converts them into Info files. You can display Info files on any terminal that displays alphabetic and numeric characters. Similarly, you can print the output generated by TeX on a wide variety of printers. Depending on what they do or what arguments(1) (*note Formatting Commands-Footnotes::) they take, you need to write @-commands on lines of their own or as part of sentences: * Write a command such as `@noindent' at the beginning of a line as the only text on the line. (`@noindent' prevents the beginning of the next line from being indented as the beginning of a paragraph.) * Write a command such as `@chapter' at the beginning of a line followed by the command's arguments, in this case the chapter title, on the rest of the line. (`@chapter' creates chapter titles.) * Write a command such as `@dots{}' wherever you wish but usually within a sentence. (`@dots{}' creates dots ...) * Write a command such as `@code{SAMPLE-CODE}' wherever you wish (but usually within a sentence) with its argument, SAMPLE-CODE in this example, between the braces. (`@code' marks text as being code.) * Write a command such as `@example' at the beginning of a line of its own; write the body-text on following lines; and write the matching `@end' command, `@end example' in this case, at the beginning of a line of its own after the body-text. (`@example' ... `@end example' indents and typesets body-text as an example.) As a general rule, a command requires braces if it mingles among other text; but it does not need braces if it starts a line of its own. The non-alphabetic commands, such as `@:', are exceptions to the rule; they do not need braces. As you gain experience with Texinfo, you will rapidly learn how to write the different commands: the different ways to write commands make it easier to write and read Texinfo files than if all commands followed exactly the same syntax. (For details about @-command syntax, see *Note @-Command Syntax: Command Syntax.) (1) The word "argument" comes from the way it is used in mathematics and does not refer to a disputation between two people; it refers to the information presented to the command. According to the `Oxford English Dictionary', the word derives from the Latin for "to make clear, prove"; thus it came to mean `the evidence offered as proof', which is to say, `the information offered', which led to its mathematical meaning. In its other thread of derivation, the word came to mean `to assert in a manner against which others may make counter assertions', which led to the meaning of `argument' as a disputation. General Syntactic Conventions ============================= All printable ASCII characters except `@', `{' and `}' can appear in a Texinfo file and stand for themselves. `@' is the escape character which introduces commands. `{' and `}' should be used only to surround arguments to certain commands. To put one of these special characters into the document, put an `@' character in front of it, like this: `@@', `@{', and `@}'. It is customary in TeX to use doubled single-quote characters to begin and end quotations: ` ` and ' ' (but without a space between the two single-quote characters). This convention should be followed in Texinfo files. TeX converts doubled single-quote characters to left- and right-hand doubled quotation marks and Info converts doubled single-quote characters to ASCII double-quotes: ` ` and ' ' to " . Use three hyphens in a row, `---', for a dash--like this. In TeX, a single or even a double hyphen produces a printed dash that is shorter than the usual typeset dash. Info reduces three hyphens to two for display on the screen. To prevent a paragraph from being indented in the printed manual, put the command `@noindent' on a line by itself before the paragraph. If you mark off a region of the Texinfo file with the `@iftex' and `@end iftex' commands, that region will appear only in the printed copy; in that region, you can use certain commands borrowed from plain TeX that you cannot use in Info. Likewise, if you mark off a region with the `@ifinfo' and `@end ifinfo' commands, that region will appear only in the Info file; in that region, you can use Info commands that you cannot use in TeX. Similarly for `@ifhtml' and `@end ifhtml'. *Note Conditionals::. *Caution:* Do not use tabs in a Texinfo file! TeX uses variable-width fonts, which means that it cannot predefine a tab to work in all circumstances. Consequently, TeX treats tabs like single spaces, and that is not what they look like. To avoid this problem, Texinfo mode causes GNU Emacs to insert multiple spaces when you press the key. Also, you can run `untabify' in Emacs to convert tabs in a region to multiple spaces. Comments ======== You can write comments in a Texinfo file that will not appear in either the Info file or the printed manual by using the `@comment' command (which may be abbreviated to `@c'). Such comments are for the person who reads the Texinfo file. All the text on a line that follows either `@comment' or `@c' is a comment; the rest of the line does not appear in either the Info file or the printed manual. (Often, you can write the `@comment' or `@c' in the middle of a line, and only the text that follows after the `@comment' or `@c' command does not appear; but some commands, such as `@settitle' and `@setfilename', work on a whole line. You cannot use `@comment' or `@c' in a line beginning with such a command.) You can write long stretches of text that will not appear in either the Info file or the printed manual by using the `@ignore' and `@end ignore' commands. Write each of these commands on a line of its own, starting each command at the beginning of the line. Text between these two commands does not appear in the processed output. You can use `@ignore' and `@end ignore' for writing comments. Often, `@ignore' and `@end ignore' is used to enclose a part of the copying permissions that applies to the Texinfo source file of a document, but not to the Info or printed version of the document. What a Texinfo File Must Have ============================= By convention, the names of Texinfo files end with one of the extensions `.texinfo', `.texi', or `.tex'. The longer extension is preferred since it describes more clearly to a human reader the nature of the file. The shorter extensions are for operating systems that cannot handle long file names. In order to be made into a printed manual and an Info file, a Texinfo file *must* begin with lines like this: \input texinfo @setfilename INFO-FILE-NAME @settitle NAME-OF-MANUAL The contents of the file follow this beginning, and then you *must* end a Texinfo file with a line like this: @bye The `\input texinfo' line tells TeX to use the `texinfo.tex' file, which tells TeX how to translate the Texinfo @-commands into TeX typesetting commands. (Note the use of the backslash, `\'; this is correct for TeX.) The `@setfilename' line provides a name for the Info file and tells TeX to open auxiliary files. The `@settitle' line specifies a title for the page headers (or footers) of the printed manual. The `@bye' line at the end of the file on a line of its own tells the formatters that the file is ended and to stop formatting. Usually, you will not use quite such a spare format, but will include mode setting and start-of-header and end-of-header lines at the beginning of a Texinfo file, like this: \input texinfo @c -*-texinfo-*- @c %**start of header @setfilename INFO-FILE-NAME @settitle NAME-OF-MANUAL @c %**end of header In the first line, `-*-texinfo-*-' causes Emacs to switch into Texinfo mode when you edit the file. The `@c' lines which surround the `@setfilename' and `@settitle' lines are optional, but you need them in order to run TeX or Info on just part of the file. (*Note Start of Header::, for more information.) Furthermore, you will usually provide a Texinfo file with a title page, indices, and the like. But the minimum, which can be useful for short documents, is just the three lines at the beginning and the one line at the end. Six Parts of a Texinfo File =========================== Generally, a Texinfo file contains more than the minimal beginning and end--it usually contains six parts: 1. Header The "Header" names the file, tells TeX which definitions' file to use, and performs other "housekeeping" tasks. 2. Summary Description and Copyright The "Summary Description and Copyright" segment describes the document and contains the copyright notice and copying permissions for the Info file. The segment must be enclosed between `@ifinfo' and `@end ifinfo' commands so that the formatters place it only in the Info file. 3. Title and Copyright The "Title and Copyright" segment contains the title and copyright pages and copying permissions for the printed manual. The segment must be enclosed between `@titlepage' and `@end titlepage' commands. The title and copyright page appear only in the printed manual. 4. `Top' Node and Master Menu The "Master Menu" contains a complete menu of all the nodes in the whole Info file. It appears only in the Info file, in the `Top' node. 5. Body The "Body" of the document may be structured like a traditional book or encyclopedia or it may be free form. 6. End The "End" contains commands for printing indices and generating the table of contents, and the `@bye' command on a line of its own. A Short Sample Texinfo File =========================== Here is a complete but very short Texinfo file, in 6 parts. The first three parts of the file, from `\input texinfo' through to `@end titlepage', look more intimidating than they are. Most of the material is standard boilerplate; when you write a manual, simply insert the names for your own manual in this segment. (*Note Beginning a File::.) In the following, the sample text is *indented*; comments on it are not. The complete file, without any comments, is shown in *Note Sample Texinfo File::. Part 1: Header -------------- The header does not appear in either the Info file or the printed output. It sets various parameters, including the name of the Info file and the title used in the header. \input texinfo @c -*-texinfo-*- @c %**start of header @setfilename sample.info @settitle Sample Document @c %**end of header @setchapternewpage odd Part 2: Summary Description and Copyright ----------------------------------------- The summary description and copyright segment does not appear in the printed document. @ifinfo This is a short example of a complete Texinfo file. Copyright @copyright{} 1990 Free Software Foundation, Inc. @end ifinfo Part 3: Titlepage and Copyright ------------------------------- The titlepage segment does not appear in the Info file. @titlepage @sp 10 @comment The title is printed in a large font. @center @titlefont{Sample Title} @c The following two commands start the copyright page. @page @vskip 0pt plus 1filll Copyright @copyright{} 1990 Free Software Foundation, Inc. @end titlepage Part 4: `Top' Node and Master Menu ---------------------------------- The `Top' node contains the master menu for the Info file. Since a printed manual uses a table of contents rather than a menu, the master menu appears only in the Info file. @node Top, First Chapter, (dir), (dir) @comment node-name, next, previous, up @menu * First Chapter:: The first chapter is the only chapter in this sample. * Concept Index:: This index has two entries. @end menu Part 5: The Body of the Document --------------------------------- The body segment contains all the text of the document, but not the indices or table of contents. This example illustrates a node and a chapter containing an enumerated list. @node First Chapter, Concept Index, Top, Top @comment node-name, next, previous, up @chapter First Chapter @cindex Sample index entry This is the contents of the first chapter. @cindex Another sample index entry Here is a numbered list. @enumerate @item This is the first item. @item This is the second item. @end enumerate The @code{makeinfo} and @code{texinfo-format-buffer} commands transform a Texinfo file such as this into an Info file; and @TeX{} typesets it for a printed manual. Part 6: The End of the Document ------------------------------- The end segment contains commands both for generating an index in a node and unnumbered chapter of its own and for generating the table of contents; and it contains the `@bye' command that marks the end of the document. @node Concept Index, , First Chapter, Top @comment node-name, next, previous, up @unnumbered Concept Index @printindex cp @contents @bye The Results ----------- Here is what the contents of the first chapter of the sample look like: This is the contents of the first chapter. Here is a numbered list. 1. This is the first item. 2. This is the second item. The `makeinfo' and `texinfo-format-buffer' commands transform a Texinfo file such as this into an Info file; and TeX typesets it for a printed manual. Acknowledgements ================ Richard M. Stallman wrote Edition 1.0 of this manual. Robert J. Chassell revised and extended it, starting with Edition 1.1. Karl Berry made updates for the Texinfo 3.8 and subsequent releases, starting with Edition 2.22. Our thanks go out to all who helped improve this work, particularly to Franc,ois Pinard and David D. Zuhn, who tirelessly recorded and reported mistakes and obscurities; our special thanks go to Melissa Weisshaus for her frequent and often tedious reviews of nearly similar editions. Our mistakes are our own. Please send suggestions and corrections to: Internet address: bug-texinfo@prep.ai.mit.edu Please include the manual's edition number and update date in your messages. Using Texinfo Mode ****************** You may edit a Texinfo file with any text editor you choose. A Texinfo file is no different from any other ASCII file. However, GNU Emacs comes with a special mode, called Texinfo mode, that provides Emacs commands and tools to help ease your work. This chapter describes features of GNU Emacs' Texinfo mode but not any features of the Texinfo formatting language. If you are reading this manual straight through from the beginning, you may want to skim through this chapter briefly and come back to it after reading succeeding chapters which describe the Texinfo formatting language in detail. Texinfo Mode Overview ===================== Texinfo mode provides special features for working with Texinfo files: * Insert frequently used @-commands. * Automatically create `@node' lines. * Show the structure of a Texinfo source file. * Automatically create or update the `Next', `Previous', and `Up' pointers of a node. * Automatically create or update menus. * Automatically create a master menu. * Format a part or all of a file for Info. * Typeset and print part or all of a file. Perhaps the two most helpful features are those for inserting frequently used @-commands and for creating node pointers and menus. The Usual GNU Emacs Editing Commands ==================================== In most cases, the usual Text mode commands work the same in Texinfo mode as they do in Text mode. Texinfo mode adds new editing commands and tools to GNU Emacs' general purpose editing features. The major difference concerns filling. In Texinfo mode, the paragraph separation variable and syntax table are redefined so that Texinfo commands that should be on lines of their own are not inadvertently included in paragraphs. Thus, the `M-q' (`fill-paragraph') command will refill a paragraph but not mix an indexing command on a line adjacent to it into the paragraph. In addition, Texinfo mode sets the `page-delimiter' variable to the value of `texinfo-chapter-level-regexp'; by default, this is a regular expression matching the commands for chapters and their equivalents, such as appendices. With this value for the page delimiter, you can jump from chapter title to chapter title with the `C-x ]' (`forward-page') and `C-x [' (`backward-page') commands and narrow to a chapter with the `C-x p' (`narrow-to-page') command. (*Note Pages: (emacs)Pages, for details about the page commands.) You may name a Texinfo file however you wish, but the convention is to end a Texinfo file name with one of the three extensions `.texinfo', `.texi', or `.tex'. A longer extension is preferred, since it is explicit, but a shorter extension may be necessary for operating systems that limit the length of file names. GNU Emacs automatically enters Texinfo mode when you visit a file with a `.texinfo' or `.texi' extension. Also, Emacs switches to Texinfo mode when you visit a file that has `-*-texinfo-*-' in its first line. If ever you are in another mode and wish to switch to Texinfo mode, type `M-x texinfo-mode'. Like all other Emacs features, you can customize or enhance Texinfo mode as you wish. In particular, the keybindings are very easy to change. The keybindings described here are the default or standard ones. Inserting Frequently Used Commands ================================== Texinfo mode provides commands to insert various frequently used @-commands into the buffer. You can use these commands to save keystrokes. The insert commands are invoked by typing `C-c' twice and then the first letter of the @-command: `C-c C-c c' `M-x texinfo-insert-@code' Insert `@code{}' and put the cursor between the braces. `C-c C-c d' `M-x texinfo-insert-@dfn' Insert `@dfn{}' and put the cursor between the braces. `C-c C-c e' `M-x texinfo-insert-@end' Insert `@end' and attempt to insert the correct following word, such as `example' or `table'. (This command does not handle nested lists correctly, but inserts the word appropriate to the immediately preceding list.) `C-c C-c i' `M-x texinfo-insert-@item' Insert `@item' and put the cursor at the beginning of the next line. `C-c C-c k' `M-x texinfo-insert-@kbd' Insert `@kbd{}' and put the cursor between the braces. `C-c C-c n' `M-x texinfo-insert-@node' Insert `@node' and a comment line listing the sequence for the `Next', `Previous', and `Up' nodes. Leave point after the `@node'. `C-c C-c o' `M-x texinfo-insert-@noindent' Insert `@noindent' and put the cursor at the beginning of the next line. `C-c C-c s' `M-x texinfo-insert-@samp' Insert `@samp{}' and put the cursor between the braces. `C-c C-c t' `M-x texinfo-insert-@table' Insert `@table' followed by a and leave the cursor after the . `C-c C-c v' `M-x texinfo-insert-@var' Insert `@var{}' and put the cursor between the braces. `C-c C-c x' `M-x texinfo-insert-@example' Insert `@example' and put the cursor at the beginning of the next line. `C-c C-c {' `M-x texinfo-insert-braces' Insert `{}' and put the cursor between the braces. `C-c C-c }' `C-c C-c ]' `M-x up-list' Move from between a pair of braces forward past the closing brace. Typing `C-c C-c ]' is easier than typing `C-c C-c }', which is, however, more mnemonic; hence the two keybindings. (Also, you can move out from between braces by typing `C-f'.) To put a command such as `@code{...}' around an *existing* word, position the cursor in front of the word and type `C-u 1 C-c C-c c'. This makes it easy to edit existing plain text. The value of the prefix argument tells Emacs how many words following point to include between braces--1 for one word, 2 for two words, and so on. Use a negative argument to enclose the previous word or words. If you do not specify a prefix argument, Emacs inserts the @-command string and positions the cursor between the braces. This feature works only for those @-commands that operate on a word or words within one line, such as `@kbd' and `@var'. This set of insert commands was created after analyzing the frequency with which different @-commands are used in the `GNU Emacs Manual' and the `GDB Manual'. If you wish to add your own insert commands, you can bind a keyboard macro to a key, use abbreviations, or extend the code in `texinfo.el'. `C-c C-c C-d' (`texinfo-start-menu-description') is an insert command that works differently from the other insert commands. It inserts a node's section or chapter title in the space for the description in a menu entry line. (A menu entry has three parts, the entry name, the node name, and the description. Only the node name is required, but a description helps explain what the node is about. *Note The Parts of a Menu: Menu Parts.) To use `texinfo-start-menu-description', position point in a menu entry line and type `C-c C-c C-d'. The command looks for and copies the title that goes with the node name, and inserts the title as a description; it positions point at beginning of the inserted text so you can edit it. The function does not insert the title if the menu entry line already contains a description. This command is only an aid to writing descriptions; it does not do the whole job. You must edit the inserted text since a title tends to use the same words as a node name but a useful description uses different words. Showing the Section Structure of a File ======================================= You can show the section structure of a Texinfo file by using the `C-c C-s' command (`texinfo-show-structure'). This command shows the section structure of a Texinfo file by listing the lines that begin with the @-commands for `@chapter', `@section', and the like. It constructs what amounts to a table of contents. These lines are displayed in another buffer called the `*Occur*' buffer. In that buffer, you can position the cursor over one of the lines and use the `C-c C-c' command (`occur-mode-goto-occurrence'), to jump to the corresponding spot in the Texinfo file. `C-c C-s' `M-x texinfo-show-structure' Show the `@chapter', `@section', and such lines of a Texinfo file. `C-c C-c' `M-x occur-mode-goto-occurrence' Go to the line in the Texinfo file corresponding to the line under the cursor in the `*Occur*' buffer. If you call `texinfo-show-structure' with a prefix argument by typing `C-u C-c C-s', it will list not only those lines with the @-commands for `@chapter', `@section', and the like, but also the `@node' lines. (This is how the `texinfo-show-structure' command worked without an argument in the first version of Texinfo. It was changed because `@node' lines clutter up the `*Occur*' buffer and are usually not needed.) You can use `texinfo-show-structure' with a prefix argument to check whether the `Next', `Previous', and `Up' pointers of an `@node' line are correct. Often, when you are working on a manual, you will be interested only in the structure of the current chapter. In this case, you can mark off the region of the buffer that you are interested in by using the `C-x n n' (`narrow-to-region') command and `texinfo-show-structure' will work on only that region. To see the whole buffer again, use `C-x n w' (`widen'). (*Note Narrowing: (emacs)Narrowing, for more information about the narrowing commands.) In addition to providing the `texinfo-show-structure' command, Texinfo mode sets the value of the page delimiter variable to match the chapter-level @-commands. This enables you to use the `C-x ]' (`forward-page') and `C-x [' (`backward-page') commands to move forward and backward by chapter, and to use the `C-x p' (`narrow-to-page') command to narrow to a chapter. *Note Pages: (emacs)Pages, for more information about the page commands. Updating Nodes and Menus ======================== Texinfo mode provides commands for automatically creating or updating menus and node pointers. The commands are called "update" commands because their most frequent use is for updating a Texinfo file after you have worked on it; but you can use them to insert the `Next', `Previous', and `Up' pointers into an `@node' line that has none and to create menus in a file that has none. If you do not use the updating commands, you need to write menus and node pointers by hand, which is a tedious task. The Updating Commands --------------------- You can use the updating commands * to insert or update the `Next', `Previous', and `Up' pointers of a node, * to insert or update the menu for a section, and * to create a master menu for a Texinfo source file. You can also use the commands to update all the nodes and menus in a region or in a whole Texinfo file. The updating commands work only with conventional Texinfo files, which are structured hierarchically like books. In such files, a structuring command line must follow closely after each `@node' line, except for the `Top' `@node' line. (A "structuring command line" is a line beginning with `@chapter', `@section', or other similar command.) You can write the structuring command line on the line that follows immediately after an `@node' line or else on the line that follows after a single `@comment' line or a single `@ifinfo' line. You cannot interpose more than one line between the `@node' line and the structuring command line; and you may interpose only an `@comment' line or an `@ifinfo' line. Commands which work on a whole buffer require that the `Top' node be followed by a node with an `@chapter' or equivalent-level command. Note that the menu updating commands will not create a main or master menu for a Texinfo file that has only `@chapter'-level nodes! The menu updating commands only create menus *within* nodes for lower level nodes. To create a menu of chapters, you must provide a `Top' node. The menu updating commands remove menu entries that refer to other Info files since they do not refer to nodes within the current buffer. This is a deficiency. Rather than use menu entries, you can use cross references to refer to other Info files. None of the updating commands affect cross references. Texinfo mode has five updating commands that are used most often: two are for updating the node pointers or menu of a single node (or a region); two are for updating every node pointer and menu in a file; and one, the `texinfo-master-menu' command, is for creating a master menu for a complete file, and optionally, for updating every node and menu in the whole Texinfo file. The `texinfo-master-menu' command is the primary command: `C-c C-u m' `M-x texinfo-master-menu' Create or update a master menu that includes all the other menus (incorporating the descriptions from pre-existing menus, if any). With an argument (prefix argument, `C-u,' if interactive), first create or update all the nodes and all the regular menus in the buffer before constructing the master menu. (*Note The Top Node and Master Menu: The Top Node, for more about a master menu.) For `texinfo-master-menu' to work, the Texinfo file must have a `Top' node and at least one subsequent node. After extensively editing a Texinfo file, you can type the following: C-u M-x texinfo-master-menu or C-u C-c C-u m This updates all the nodes and menus completely and all at once. The other major updating commands do smaller jobs and are designed for the person who updates nodes and menus as he or she writes a Texinfo file. The commands are: `C-c C-u C-n' `M-x texinfo-update-node' Insert the `Next', `Previous', and `Up' pointers for the node that point is within (i.e., for the `@node' line preceding point). If the `@node' line has pre-existing `Next', `Previous', or `Up' pointers in it, the old pointers are removed and new ones inserted. With an argument (prefix argument, `C-u', if interactive), this command updates all `@node' lines in the region (which is the text between point and mark). `C-c C-u C-m' `M-x texinfo-make-menu' Create or update the menu in the node that point is within. With an argument (`C-u' as prefix argument, if interactive), the command makes or updates menus for the nodes which are either within or a part of the region. Whenever `texinfo-make-menu' updates an existing menu, the descriptions from that menu are incorporated into the new menu. This is done by copying descriptions from the existing menu to the entries in the new menu that have the same node names. If the node names are different, the descriptions are not copied to the new menu. `C-c C-u C-e' `M-x texinfo-every-node-update' Insert or update the `Next', `Previous', and `Up' pointers for every node in the buffer. `C-c C-u C-a' `M-x texinfo-all-menus-update' Create or update all the menus in the buffer. With an argument (`C-u' as prefix argument, if interactive), first insert or update all the node pointers before working on the menus. If a master menu exists, the `texinfo-all-menus-update' command updates it; but the command does not create a new master menu if none already exists. (Use the `texinfo-master-menu' command for that.) When working on a document that does not merit a master menu, you can type the following: C-u C-c C-u C-a or C-u M-x texinfo-all-menus-update This updates all the nodes and menus. The `texinfo-column-for-description' variable specifies the column to which menu descriptions are indented. By default, the value is 32 although it is often useful to reduce it to as low as 24. You can set the variable with the `M-x edit-options' command (*note Editing Variable Values: (emacs)Edit Options.) or with the `M-x set-variable' command (*note Examining and Setting Variables: (emacs)Examining.). Also, the `texinfo-indent-menu-description' command may be used to indent existing menu descriptions to a specified column. Finally, if you wish, you can use the `texinfo-insert-node-lines' command to insert missing `@node' lines into a file. (*Note Other Updating Commands::, for more information.) Updating Requirements --------------------- To use the updating commands, you must organize the Texinfo file hierarchically with chapters, sections, subsections, and the like. When you construct the hierarchy of the manual, do not `jump down' more than one level at a time: you can follow the `Top' node with a chapter, but not with a section; you can follow a chapter with a section, but not with a subsection. However, you may `jump up' any number of levels at one time--for example, from a subsection to a chapter. Each `@node' line, with the exception of the line for the `Top' node, must be followed by a line with a structuring command such as `@chapter', `@section', or `@unnumberedsubsec'. Each `@node' line/structuring-command line combination must look either like this: @node Comments, Minimum, Conventions, Overview @comment node-name, next, previous, up @section Comments or like this (without the `@comment' line): @node Comments, Minimum, Conventions, Overview @section Comments In this example, `Comments' is the name of both the node and the section. The next node is called `Minimum' and the previous node is called `Conventions'. The `Comments' section is within the `Overview' node, which is specified by the `Up' pointer. (Instead of an `@comment' line, you can write an `@ifinfo' line.) If a file has a `Top' node, it must be called `top' or `Top' and be the first node in the file. The menu updating commands create a menu of sections within a chapter, a menu of subsections within a section, and so on. This means that you must have a `Top' node if you want a menu of chapters. Incidentally, the `makeinfo' command will create an Info file for a hierarchically organized Texinfo file that lacks `Next', `Previous' and `Up' pointers. Thus, if you can be sure that your Texinfo file will be formatted with `makeinfo', you have no need for the `update node' commands. (*Note Creating an Info File: Create an Info File, for more information about `makeinfo'.) However, both `makeinfo' and the `texinfo-format-...' commands require that you insert menus in the file. Other Updating Commands ----------------------- In addition to the five major updating commands, Texinfo mode possesses several less frequently used updating commands: `M-x texinfo-insert-node-lines' Insert `@node' lines before the `@chapter', `@section', and other sectioning commands wherever they are missing throughout a region in a Texinfo file. With an argument (`C-u' as prefix argument, if interactive), the `texinfo-insert-node-lines' command not only inserts `@node' lines but also inserts the chapter or section titles as the names of the corresponding nodes. In addition, it inserts the titles as node names in pre-existing `@node' lines that lack names. Since node names should be more concise than section or chapter titles, you must manually edit node names so inserted. For example, the following marks a whole buffer as a region and inserts `@node' lines and titles throughout: C-x h C-u M-x texinfo-insert-node-lines (Note that this command inserts titles as node names in `@node' lines; the `texinfo-start-menu-description' command (*note Inserting Frequently Used Commands: Inserting.) inserts titles as descriptions in menu entries, a different action. However, in both cases, you need to edit the inserted text.) `M-x texinfo-multiple-files-update' Update nodes and menus in a document built from several separate files. With `C-u' as a prefix argument, create and insert a master menu in the outer file. With a numeric prefix argument, such as `C-u 2', first update all the menus and all the `Next', `Previous', and `Up' pointers of all the included files before creating and inserting a master menu in the outer file. The `texinfo-multiple-files-update' command is described in the appendix on `@include' files. *Note texinfo-multiple-files-update::. `M-x texinfo-indent-menu-description' Indent every description in the menu following point to the specified column. You can use this command to give yourself more space for descriptions. With an argument (`C-u' as prefix argument, if interactive), the `texinfo-indent-menu-description' command indents every description in every menu in the region. However, this command does not indent the second and subsequent lines of a multi-line description. `M-x texinfo-sequential-node-update' Insert the names of the nodes immediately following and preceding the current node as the `Next' or `Previous' pointers regardless of those nodes' hierarchical level. This means that the `Next' node of a subsection may well be the next chapter. Sequentially ordered nodes are useful for novels and other documents that you read through sequentially. (However, in Info, the `g* ' command lets you look through the file sequentially, so sequentially ordered nodes are not strictly necessary.) With an argument (prefix argument, if interactive), the `texinfo-sequential-node-update' command sequentially updates all the nodes in the region. Formatting for Info =================== Texinfo mode provides several commands for formatting part or all of a Texinfo file for Info. Often, when you are writing a document, you want to format only part of a file--that is, a region. You can use either the `texinfo-format-region' or the `makeinfo-region' command to format a region: `C-c C-e C-r' `M-x texinfo-format-region' `C-c C-m C-r' `M-x makeinfo-region' Format the current region for Info. You can use either the `texinfo-format-buffer' or the `makeinfo-buffer' command to format a whole buffer: `C-c C-e C-b' `M-x texinfo-format-buffer' `C-c C-m C-b' `M-x makeinfo-buffer' Format the current buffer for Info. For example, after writing a Texinfo file, you can type the following: C-u C-c C-u m or C-u M-x texinfo-master-menu This updates all the nodes and menus. Then type the following to create an Info file: C-c C-m C-b or M-x makeinfo-buffer For TeX or the Info formatting commands to work, the file *must* include a line that has `@setfilename' in its header. *Note Create an Info File::, for details about Info formatting. Formatting and Printing ======================= Typesetting and printing a Texinfo file is a multi-step process in which you first create a file for printing (called a DVI file), and then print the file. Optionally, you may also create indices. To do this, you must run the `texindex' command after first running the `tex' typesetting command; and then you must run the `tex' command again. Or else run the `texi2dvi' command which automatically creates indices as needed. Often, when you are writing a document, you want to typeset and print only part of a file to see what it will look like. You can use the `texinfo-tex-region' and related commands for this purpose. Use the `texinfo-tex-buffer' command to format all of a buffer. `C-c C-t C-b' `M-x texinfo-tex-buffer' Run `texi2dvi' on the buffer. In addition to running TeX on the buffer, this command automatically creates or updates indices as needed. `C-c C-t C-r' `M-x texinfo-tex-region' Run TeX on the region. `C-c C-t C-i' `M-x texinfo-texindex' Run `texindex' to sort the indices of a Texinfo file formatted with `texinfo-tex-region'. The `texinfo-tex-region' command does not run `texindex' automatically; it only runs the `tex' typesetting command. You must run the `texinfo-tex-region' command a second time after sorting the raw index files with the `texindex' command. (Usually, you do not format an index when you format a region, only when you format a buffer. Now that the `texi2dvi' command exists, there is no little need for this command.) `C-c C-t C-p' `M-x texinfo-tex-print' Print the file (or the part of the file) previously formatted with `texinfo-tex-buffer' or `texinfo-tex-region'. For `texinfo-tex-region' or `texinfo-tex-buffer' to work, the file *must* start with a `\input texinfo' line and must include an `@settitle' line. The file must end with `@bye' on a line by itself. (When you use `texinfo-tex-region', you must surround the `@settitle' line with start-of-header and end-of-header lines.) *Note Format/Print Hardcopy::, for a description of the other TeX related commands, such as `tex-show-print-queue'. Texinfo Mode Summary ==================== In Texinfo mode, each set of commands has default keybindings that begin with the same keys. All the commands that are custom-created for Texinfo mode begin with `C-c'. The keys are somewhat mnemonic. Insert Commands --------------- The insert commands are invoked by typing `C-c' twice and then the first letter of the @-command to be inserted. (It might make more sense mnemonically to use `C-c C-i', for `custom insert', but `C-c C-c' is quick to type.) C-c C-c c Insert `@code'. C-c C-c d Insert `@dfn'. C-c C-c e Insert `@end'. C-c C-c i Insert `@item'. C-c C-c n Insert `@node'. C-c C-c s Insert `@samp'. C-c C-c v Insert `@var'. C-c C-c { Insert braces. C-c C-c ] C-c C-c } Move out of enclosing braces. C-c C-c C-d Insert a node's section title in the space for the description in a menu entry line. Show Structure -------------- The `texinfo-show-structure' command is often used within a narrowed region. C-c C-s List all the headings. The Master Update Command ------------------------- The `texinfo-master-menu' command creates a master menu; and can be used to update every node and menu in a file as well. C-c C-u m M-x texinfo-master-menu Create or update a master menu. C-u C-c C-u m With `C-u' as a prefix argument, first create or update all nodes and regular menus, and then create a master menu. Update Pointers --------------- The update pointer commands are invoked by typing `C-c C-u' and then either `C-n' for `texinfo-update-node' or `C-e' for `texinfo-every-node-update'. C-c C-u C-n Update a node. C-c C-u C-e Update every node in the buffer. Update Menus ------------ Invoke the update menu commands by typing `C-c C-u' and then either `C-m' for `texinfo-make-menu' or `C-a' for `texinfo-all-menus-update'. To update both nodes and menus at the same time, precede `C-c C-u C-a' with `C-u'. C-c C-u C-m Make or update a menu. C-c C-u C-a Make or update all menus in a buffer. C-u C-c C-u C-a With `C-u' as a prefix argument, first create or update all nodes and then create or update all menus. Format for Info --------------- The Info formatting commands that are written in Emacs Lisp are invoked by typing `C-c C-e' and then either `C-r' for a region or `C-b' for the whole buffer. The Info formatting commands that are written in C and based on the `makeinfo' program are invoked by typing `C-c C-m' and then either `C-r' for a region or `C-b' for the whole buffer. Use the `texinfo-format...' commands: C-c C-e C-r Format the region. C-c C-e C-b Format the buffer. Use `makeinfo': C-c C-m C-r Format the region. C-c C-m C-b Format the buffer. C-c C-m C-l Recenter the `makeinfo' output buffer. C-c C-m C-k Kill the `makeinfo' formatting job. Typeset and Print ----------------- The TeX typesetting and printing commands are invoked by typing `C-c C-t' and then another control command: `C-r' for `texinfo-tex-region', `C-b' for `texinfo-tex-buffer', and so on. C-c C-t C-r Run TeX on the region. C-c C-t C-b Run `texi2dvi' on the buffer. C-c C-t C-i Run `texindex'. C-c C-t C-p Print the DVI file. C-c C-t C-q Show the print queue. C-c C-t C-d Delete a job from the print queue. C-c C-t C-k Kill the current TeX formatting job. C-c C-t C-x Quit a currently stopped TeX formatting job. C-c C-t C-l Recenter the output buffer. Other Updating Commands ----------------------- The `other updating commands' do not have standard keybindings because they are rarely used. M-x texinfo-insert-node-lines Insert missing `@node' lines in region. With `C-u' as a prefix argument, use section titles as node names. M-x texinfo-multiple-files-update Update a multi-file document. With `C-u 2' as a prefix argument, create or update all nodes and menus in all included files first. M-x texinfo-indent-menu-description Indent descriptions. M-x texinfo-sequential-node-update Insert node pointers in strict sequence. Beginning a Texinfo File ************************ Certain pieces of information must be provided at the beginning of a Texinfo file, such as the name of the file and the title of the document. Four Parts Begin a File ======================= Generally, the beginning of a Texinfo file has four parts: 1. The header, delimited by special comment lines, that includes the commands for naming the Texinfo file and telling TeX what definitions' file to use when processing the Texinfo file. 2. A short statement of what the file is about, with a copyright notice and copying permissions. This is enclosed in `@ifinfo' and `@end ifinfo' commands so that the formatters place it only in the Info file. 3. A title page and copyright page, with a copyright notice and copying permissions. This is enclosed between `@titlepage' and `@end titlepage' commands. The title and copyright page appear only in the printed manual. 4. The `Top' node that contains a menu for the whole Info file. The contents of this node appear only in the Info file. Also, optionally, you may include the copying conditions for a program and a warranty disclaimer. The copying section will be followed by an introduction or else by the first chapter of the manual. Since the copyright notice and copying permissions for the Texinfo document (in contrast to the copying permissions for a program) are in parts that appear only in the Info file or only in the printed manual, this information must be given twice. Sample Texinfo File Beginning ============================= The following sample shows what is needed. \input texinfo @c -*-texinfo-*- @c %**start of header @setfilename NAME-OF-INFO-FILE @settitle NAME-OF-MANUAL @setchapternewpage odd @c %**end of header @ifinfo This file documents ... Copyright YEAR COPYRIGHT-OWNER Permission is granted to ... @end ifinfo @c This title page illustrates only one of the @c two methods of forming a title page. @titlepage @title NAME-OF-MANUAL-WHEN-PRINTED @subtitle SUBTITLE-IF-ANY @subtitle SECOND-SUBTITLE @author AUTHOR @c The following two commands @c start the copyright page. @page @vskip 0pt plus 1filll Copyright @copyright{} YEAR COPYRIGHT-OWNER Published by ... Permission is granted to ... @end titlepage @node Top, Overview, (dir), (dir) @ifinfo This document describes ... This document applies to version ... of the program named ... @end ifinfo @menu * Copying:: Your rights and freedoms. * First Chapter:: Getting started ... * Second Chapter:: ... ... ... @end menu @node First Chapter, Second Chapter, top, top @comment node-name, next, previous, up @chapter First Chapter @cindex Index entry for First Chapter The Texinfo File Header ======================= Texinfo files start with at least three lines that provide Info and TeX with necessary information. These are the `\input texinfo' line, the `@settitle' line, and the `@setfilename' line. If you want to run TeX on just a part of the Texinfo File, you must write the `@settitle' and `@setfilename' lines between start-of-header and end-of-header lines. Thus, the beginning of a Texinfo file looks like this: \input texinfo @c -*-texinfo-*- @setfilename sample.info @settitle Sample Document or else like this: \input texinfo @c -*-texinfo-*- @c %**start of header @setfilename sample.info @settitle Sample Document @c %**end of header The First Line of a Texinfo File -------------------------------- Every Texinfo file that is to be the top-level input to TeX must begin with a line that looks like this: \input texinfo @c -*-texinfo-*- This line serves two functions: 1. When the file is processed by TeX, the `\input texinfo' command tells TeX to load the macros needed for processing a Texinfo file. These are in a file called `texinfo.tex', which is usually located in the `/usr/lib/tex/macros' directory. TeX uses the backslash, `\', to mark the beginning of a command, just as Texinfo uses `@'. The `texinfo.tex' file causes the switch from `\' to `@'; before the switch occurs, TeX requires `\', which is why it appears at the beginning of the file. 2. When the file is edited in GNU Emacs, the `-*-texinfo-*-' mode specification tells Emacs to use Texinfo mode. Start of Header --------------- Write a start-of-header line on the second line of a Texinfo file. Follow the start-of-header line with `@setfilename' and `@settitle' lines and, optionally, with other command lines, such as `@smallbook' or `@footnotestyle'; and then by an end-of-header line (*note End of Header::.). With these lines, you can format part of a Texinfo file for Info or typeset part for printing. A start-of-header line looks like this: @c %**start of header The odd string of characters, `%**', is to ensure that no other comment is accidentally taken for a start-of-header line. `@setfilename' -------------- In order to serve as the primary input file for either `makeinfo' or TeX, a Texinfo file must contain a line that looks like this: @setfilename INFO-FILE-NAME Write the `@setfilename' command at the beginning of a line and follow it on the same line by the Info file name. Do not write anything else on the line; anything on the line after the command is considered part of the file name, including a comment. The `@setfilename' line specifies the name of the Info file to be generated. This name should be different from the name of the Texinfo file. There are two conventions for choosing the name: you can either remove the `.tex' extension from the input file name, or replace it with the `.info' extension. Some operating systems cannot handle long file names. You can run into a problem even when the file name you specify is itself short enough. This occurs because the Info formatters split a long Info file into short indirect subfiles, and name them by appending `-1', `-2', ..., `-10', `-11', and so on, to the original file name. (*Note Tag Files and Split Files: Tag and Split Files.) The subfile name `texinfo.info-10', for example, is too long for some systems; so the Info file name for this document is `texinfo' rather than `texinfo.info'. The Info formatting commands ignore everything written before the `@setfilename' line, which is why the very first line of the file (the `\input' line) does not need to be commented out. The `@setfilename' line produces no output when you typeset a printed manual, but is does an essential job: it opens the index, cross-reference, and other auxiliary files used by Texinfo. `@settitle' ----------- In order to be made into a printed manual, a Texinfo file must contain a line that looks like this: @settitle TITLE Write the `@settitle' command at the beginning of a line and follow it on the same line by the title. This tells TeX the title to use in a header or footer. Do not write anything else on the line; anything on the line after the command is considered part of the title, including a comment. Conventionally, when TeX formats a Texinfo file for double-sided output, the title is printed in the left-hand (even-numbered) page headings and the current chapter title is printed in the right-hand (odd-numbered) page headings. (TeX learns the title of each chapter from each `@chapter' command.) Page footers are not printed. Even if you are printing in a single-sided style, TeX looks for an `@settitle' command line, in case you include the manual title in the heading. The `@settitle' command should precede everything that generates actual output in TeX. Although the title in the `@settitle' command is usually the same as the title on the title page, it does not affect the title as it appears on the title page. Thus, the two do not need not match exactly; and the title in the `@settitle' command can be a shortened or expanded version of the title as it appears on the title page. (*Note `@titlepage': titlepage.) TeX prints page headings only for that text that comes after the `@end titlepage' command in the Texinfo file, or that comes after an `@headings' command that turns on headings. (*Note The `@headings' Command: headings on off, for more information.) You may, if you wish, create your own, customized headings and footings. *Note Page Headings: Headings, for a detailed discussion of this process. `@setchapternewpage' -------------------- In a book or a manual, text is usually printed on both sides of the paper, chapters start on right-hand pages, and right-hand pages have odd numbers. But in short reports, text often is printed only on one side of the paper. Also in short reports, chapters sometimes do not start on new pages, but are printed on the same page as the end of the preceding chapter, after a small amount of vertical whitespace. You can use the `@setchapternewpage' command with various arguments to specify how TeX should start chapters and whether it should typeset pages for printing on one or both sides of the paper (single-sided or double-sided printing). Write the `@setchapternewpage' command at the beginning of a line followed by its argument. For example, you would write the following to cause each chapter to start on a fresh odd-numbered page: @setchapternewpage odd You can specify one of three alternatives with the `@setchapternewpage' command: `@setchapternewpage off' Cause TeX to typeset a new chapter on the same page as the last chapter, after skipping some vertical whitespace. Also, cause TeX to format page headers for single-sided printing. (You can override the headers format with the `@headings double' command; see *Note The `@headings' Command: headings on off.) `@setchapternewpage on' Cause TeX to start new chapters on new pages and to typeset page headers for single-sided printing. This is the form most often used for short reports. This alternative is the default. `@setchapternewpage odd' Cause TeX to start new chapters on new, odd-numbered pages (right-handed pages) and to typeset for double-sided printing. This is the form most often used for books and manuals. Texinfo does not have an `@setchapternewpage even' command. (You can countermand or modify an `@setchapternewpage' command with an `@headings' command. *Note The `@headings' Command: headings on off.) At the beginning of a manual or book, pages are not numbered--for example, the title and copyright pages of a book are not numbered. By convention, table of contents pages are numbered with roman numerals and not in sequence with the rest of the document. Since an Info file does not have pages, the `@setchapternewpage' command has no effect on it. Usually, you do not write an `@setchapternewpage' command for single-sided printing, but accept the default which is to typeset for single-sided printing and to start new chapters on new pages. Usually, you write an `@setchapternewpage odd' command for double-sided printing. Paragraph Indenting ------------------- The Info formatting commands may insert spaces at the beginning of the first line of each paragraph, thereby indenting that paragraph. You can use the `@paragraphindent' command to specify the indentation. Write an `@paragraphindent' command at the beginning of a line followed by either `asis' or a number. The template is: @paragraphindent INDENT The Info formatting commands indent according to the value of INDENT: * If the value of INDENT is `asis', the Info formatting commands do not change the existing indentation. * If the value of INDENT is 0, the Info formatting commands delete existing indentation. * If the value of INDENT is greater than 0, the Info formatting commands indent the paragraph by that number of spaces. The default value of INDENT is `asis'. Write the `@paragraphindent' command before or shortly after the end-of-header line at the beginning of a Texinfo file. (If you write the command between the start-of-header and end-of-header lines, the region formatting commands indent paragraphs as specified.) A peculiarity of the `texinfo-format-buffer' and `texinfo-format-region' commands is that they do not indent (nor fill) paragraphs that contain `@w' or `@*' commands. *Note Refilling Paragraphs::, for a detailed description of what goes on. End of Header ------------- Follow the header lines with an end-of-header line. An end-of-header line looks like this: @c %**end of header If you include the `@setchapternewpage' command between the start-of-header and end-of-header lines, TeX will typeset a region as that command specifies. Similarly, if you include an `@smallbook' command between the start-of-header and end-of-header lines, TeX will typeset a region in the "small" book format. The reason for the odd string of characters (`%**') is so that the `texinfo-tex-region' command does not accidentally find something that it should not when it is looking for the header. The start-of-header line and the end-of-header line are Texinfo mode variables that you can change. Summary and Copying Permissions for Info ======================================== The title page and the copyright page appear only in the printed copy of the manual; therefore, the same information must be inserted in a section that appears only in the Info file. This section usually contains a brief description of the contents of the Info file, a copyright notice, and copying permissions. The copyright notice should read: Copyright YEAR COPYRIGHT-OWNER and be put on a line by itself. Standard text for the copyright permissions is contained in an appendix to this manual; see *Note `ifinfo' Copying Permissions: ifinfo Permissions, for the complete text. The permissions text appears in an Info file *before* the first node. This mean that a reader does *not* see this text when reading the file using Info, except when using the advanced Info command `g *'. The Title and Copyright Pages ============================= A manual's name and author are usually printed on a title page. Sometimes copyright information is printed on the title page as well; more often, copyright information is printed on the back of the title page. The title and copyright pages appear in the printed manual, but not in the Info file. Because of this, it is possible to use several slightly obscure TeX typesetting commands that cannot be used in an Info file. In addition, this part of the beginning of a Texinfo file contains the text of the copying permissions that will appear in the printed manual. *Note Titlepage Copying Permissions: Titlepage Permissions, for the standard text for the copyright permissions. `@titlepage' ------------ Start the material for the title page and following copyright page with `@titlepage' on a line by itself and end it with `@end titlepage' on a line by itself. The `@end titlepage' command starts a new page and turns on page numbering. (*Note Page Headings: Headings, for details about how to generate page headings.) All the material that you want to appear on unnumbered pages should be put between the `@titlepage' and `@end titlepage' commands. By using the `@page' command you can force a page break within the region delineated by the `@titlepage' and `@end titlepage' commands and thereby create more than one unnumbered page. This is how the copyright page is produced. (The `@titlepage' command might perhaps have been better named the `@titleandadditionalpages' command, but that would have been rather long!) When you write a manual about a computer program, you should write the version of the program to which the manual applies on the title page. If the manual changes more frequently than the program or is independent of it, you should also include an edition number(1) (*note titlepage-Footnotes::) for the manual. This helps readers keep track of which manual is for which version of the program. (The `Top' node should also contain this information; see *Note `@top': makeinfo top.) Texinfo provides two main methods for creating a title page. One method uses the `@titlefont', `@sp', and `@center' commands to generate a title page in which the words on the page are centered. The second method uses the `@title', `@subtitle', and `@author' commands to create a title page with black rules under the title and author lines and the subtitle text set flush to the right hand side of the page. With this method, you do not specify any of the actual formatting of the title page. You specify the text you want, and Texinfo does the formatting. You may use either method. For extremely simple applications, Texinfo also provides a command `@shorttitlepage' which takes a single argument as the title. The argument is typeset on a page by itself and followed by a blank page. (1) We have found that it is helpful to refer to versions of manuals as `editions' and versions of programs as `versions'; otherwise, we find we are liable to confuse each other in conversation by referring to both the documentation and the software with the same words. `@titlefont', `@center', and `@sp' ---------------------------------- You can use the `@titlefont', `@sp', and `@center' commands to create a title page for a printed document. (This is the first of the two methods for creating a title page in Texinfo.) Use the `@titlefont' command to select a large font suitable for the title itself. For example: @titlefont{Texinfo} Use the `@center' command at the beginning of a line to center the remaining text on that line. Thus, @center @titlefont{Texinfo} centers the title, which in this example is "Texinfo" printed in the title font. Use the `@sp' command to insert vertical space. For example: @sp 2 This inserts two blank lines on the printed page. (*Note `@sp': sp, for more information about the `@sp' command.) A template for this method looks like this: @titlepage @sp 10 @center @titlefont{NAME-OF-MANUAL-WHEN-PRINTED} @sp 2 @center SUBTITLE-IF-ANY @sp 2 @center AUTHOR ... @end titlepage The spacing of the example fits an 8 1/2 by 11 inch manual. `@title', `@subtitle', and `@author' ------------------------------------ You can use the `@title', `@subtitle', and `@author' commands to create a title page in which the vertical and horizontal spacing is done for you automatically. This contrasts with the method described in the previous section, in which the `@sp' command is needed to adjust vertical spacing. Write the `@title', `@subtitle', or `@author' commands at the beginning of a line followed by the title, subtitle, or author. The `@title' command produces a line in which the title is set flush to the left-hand side of the page in a larger than normal font. The title is underlined with a black rule. The `@subtitle' command sets subtitles in a normal-sized font flush to the right-hand side of the page. The `@author' command sets the names of the author or authors in a middle-sized font flush to the left-hand side of the page on a line near the bottom of the title page. The names are underlined with a black rule that is thinner than the rule that underlines the title. (The black rule only occurs if the `@author' command line is followed by an `@page' command line.) There are two ways to use the `@author' command: you can write the name or names on the remaining part of the line that starts with an `@author' command: @author by Jane Smith and John Doe or you can write the names one above each other by using two (or more) `@author' commands: @author Jane Smith @author John Doe (Only the bottom name is underlined with a black rule.) A template for this method looks like this: @titlepage @title NAME-OF-MANUAL-WHEN-PRINTED @subtitle SUBTITLE-IF-ANY @subtitle SECOND-SUBTITLE @author AUTHOR @page ... @end titlepage Contrast this form with the form of a title page written using the `@sp', `@center', and `@titlefont' commands: @titlepage @sp 10 @center @titlefont{Name of Manual When Printed} @sp 2 @center Subtitle, If Any @sp 1 @center Second subtitle @sp 2 @center Author @page ... @end titlepage Copyright Page and Permissions ------------------------------ By international treaty, the copyright notice for a book should be either on the title page or on the back of the title page. The copyright notice should include the year followed by the name of the organization or person who owns the copyright. When the copyright notice is on the back of the title page, that page is customarily not numbered. Therefore, in Texinfo, the information on the copyright page should be within `@titlepage' and `@end titlepage' commands. Use the `@page' command to cause a page break. To push the copyright notice and the other text on the copyright page towards the bottom of the page, you can write a somewhat mysterious line after the `@page' command that reads like this: @vskip 0pt plus 1filll This is a TeX command that is not supported by the Info formatting commands. The `@vskip' command inserts whitespace. The `0pt plus 1filll' means to put in zero points of mandatory whitespace, and as much optional whitespace as needed to push the following text to the bottom of the page. Note the use of three `l's in the word `filll'; this is the correct usage in TeX. In a printed manual, the `@copyright{}' command generates a `c' inside a circle. (In Info, it generates `(C)'.) The copyright notice itself has the following legally defined sequence: Copyright (C) YEAR COPYRIGHT-OWNER It is customary to put information on how to get a manual after the copyright notice, followed by the copying permissions for the manual. Note that permissions must be given here as well as in the summary segment within `@ifinfo' and `@end ifinfo' that immediately follows the header since this text appears only in the printed manual and the `ifinfo' text appears only in the Info file. *Note Sample Permissions::, for the standard text. Heading Generation ------------------ An `@end titlepage' command on a line by itself not only marks the end of the title and copyright pages, but also causes TeX to start generating page headings and page numbers. To repeat what is said elsewhere, Texinfo has two standard page heading formats, one for documents which are printed on one side of each sheet of paper (single-sided printing), and the other for documents which are printed on both sides of each sheet (double-sided printing). (*Note `@setchapternewpage': setchapternewpage.) You can specify these formats in different ways: * The conventional way is to write an `@setchapternewpage' command before the title page commands, and then have the `@end titlepage' command start generating page headings in the manner desired. (*Note `@setchapternewpage': setchapternewpage.) * Alternatively, you can use the `@headings' command to prevent page headings from being generated or to start them for either single or double-sided printing. (Write an `@headings' command immediately after the `@end titlepage' command. *Note The `@headings' Command: headings on off, for more information.) * Or, you may specify your own page heading and footing format. *Note Page Headings: Headings, for detailed information about page headings and footings. Most documents are formatted with the standard single-sided or double-sided format, using `@setchapternewpage odd' for double-sided printing and no `@setchapternewpage' command for single-sided printing. The `@headings' Command ----------------------- The `@headings' command is rarely used. It specifies what kind of page headings and footings to print on each page. Usually, this is controlled by the `@setchapternewpage' command. You need the `@headings' command only if the `@setchapternewpage' command does not do what you want, or if you want to turn off pre-defined page headings prior to defining your own. Write an `@headings' command immediately after the `@end titlepage' command. You can use `@headings' as follows: `@headings off' Turn off printing of page headings. `@headings single' Turn on page headings appropriate for single-sided printing. `@headings double' Turn on page headings appropriate for double-sided printing. The two commands, `@headings on' and `@headings double', are synonymous. `@headings singleafter' `@headings doubleafter' Turn on `single' or `double' headings, respectively, after the current page is output. `@headings on' Turn on page headings: `single' if `@setchapternewpage on', `double' otherwise. For example, suppose you write `@setchapternewpage off' before the `@titlepage' command to tell TeX to start a new chapter on the same page as the end of the last chapter. This command also causes TeX to typeset page headers for single-sided printing. To cause TeX to typeset for double sided printing, write `@headings double' after the `@end titlepage' command. You can stop TeX from generating any page headings at all by writing `@headings off' on a line of its own immediately after the line containing the `@end titlepage' command, like this: @end titlepage @headings off The `@headings off' command overrides the `@end titlepage' command, which would otherwise cause TeX to print page headings. You can also specify your own style of page heading and footing. *Note Page Headings: Headings, for more information. The `Top' Node and Master Menu ============================== The `Top' node is the node from which you enter an Info file. A `Top' node should contain a brief description of the Info file and an extensive, master menu for the whole Info file. This helps the reader understand what the Info file is about. Also, you should write the version number of the program to which the Info file applies; or, at least, the edition number. The contents of the `Top' node should appear only in the Info file; none of it should appear in printed output, so enclose it between `@ifinfo' and `@end ifinfo' commands. (TeX does not print either an `@node' line or a menu; they appear only in Info; strictly speaking, you are not required to enclose these parts between `@ifinfo' and `@end ifinfo', but it is simplest to do so. *Note Conditionally Visible Text: Conditionals.) `Top' Node Title ---------------- Sometimes, you will want to place an `@top' sectioning command line containing the title of the document immediately after the `@node Top' line (*note The `@top' Sectioning Command: makeinfo top command., for more information). For example, the beginning of the Top node of this manual contains an `@top' sectioning command, a short description, and edition and version information. It looks like this: ... @end titlepage @ifinfo @node Top, Copying, (dir), (dir) @top Texinfo Texinfo is a documentation system... This is edition... ... @end ifinfo @menu * Copying:: Texinfo is freely redistributable. * Overview:: What is Texinfo? ... @end menu In a `Top' node, the `Previous', and `Up' nodes usually refer to the top level directory of the whole Info system, which is called `(dir)'. The `Next' node refers to the first node that follows the main or master menu, which is usually the copying permissions, introduction, or first chapter. Parts of a Master Menu ---------------------- A "master menu" is a detailed main menu listing all the nodes in a file. A master menu is enclosed in `@menu' and `@end menu' commands and does not appear in the printed document. Generally, a master menu is divided into parts. * The first part contains the major nodes in the Texinfo file: the nodes for the chapters, chapter-like sections, and the appendices. * The second part contains nodes for the indices. * The third and subsequent parts contain a listing of the other, lower level nodes, often ordered by chapter. This way, rather than go through an intermediary menu, an inquirer can go directly to a particular node when searching for specific information. These menu items are not required; add them if you think they are a convenience. If you do use them, put `@detailmenu' before the first one, and `@end detailmenu' after the last; otherwise, `makeinfo' will get confused. Each section in the menu can be introduced by a descriptive line. So long as the line does not begin with an asterisk, it will not be treated as a menu entry. (*Note Writing a Menu::, for more information.) For example, the master menu for this manual looks like the following (but has many more entries): @menu * Copying:: Texinfo is freely redistributable. * Overview:: What is Texinfo? * Texinfo Mode:: Special features in GNU Emacs. ... ... * Command and Variable Index:: An entry for each @-command. * Concept Index:: An entry for each concept. @detailmenu --- The Detailed Node Listing --- Overview of Texinfo * Info Files:: What is an Info file? * Printed Manuals:: Characteristics of a printed manual. ... ... Using Texinfo Mode * Info on a Region:: Formatting part of a file for Info. ... ... @end detailmenu @end menu Software Copying Permissions ============================ If the Texinfo file has a section containing the "General Public License" and the distribution information and a warranty disclaimer for the software that is documented, this section usually follows the `Top' node. The General Public License is very important to Project GNU software. It ensures that you and others will continue to have a right to use and share the software. The copying and distribution information and the disclaimer are followed by an introduction or else by the first chapter of the manual. Although an introduction is not a required part of a Texinfo file, it is very helpful. Ideally, it should state clearly and concisely what the file is about and who would be interested in reading it. In general, an introduction would follow the licensing and distribution information, although sometimes people put it earlier in the document. Usually, an introduction is put in an `@unnumbered' section. (*Note The `@unnumbered' and `@appendix' Commands: unnumbered & appendix.) Ending a Texinfo File ********************* The end of a Texinfo file should include the commands that create indices and generate detailed and summary tables of contents. And it must include the `@bye' command that marks the last line processed by TeX. For example: @node Concept Index, , Variables Index, Top @c node-name, next, previous, up @unnumbered Concept Index @printindex cp @contents @bye Index Menus and Printing an Index ================================= To print an index means to include it as part of a manual or Info file. This does not happen automatically just because you use `@cindex' or other index-entry generating commands in the Texinfo file; those just cause the raw data for the index to be accumulated. To generate an index, you must include the `@printindex' command at the place in the document where you want the index to appear. Also, as part of the process of creating a printed manual, you must run a program called `texindex' (*note Format/Print Hardcopy::.) to sort the raw data to produce a sorted index file. The sorted index file is what is actually used to print the index. Texinfo offers six different types of predefined index: the concept index, the function index, the variables index, the keystroke index, the program index, and the data type index (*note Predefined Indices::.). Each index type has a two-letter name: `cp', `fn', `vr', `ky', `pg', and `tp'. You may merge indices, or put them into separate sections (*note Combining Indices::.); or you may define your own indices (*note Defining New Indices: New Indices.). The `@printindex' command takes a two-letter index name, reads the corresponding sorted index file and formats it appropriately into an index. The `@printindex' command does not generate a chapter heading for the index. Consequently, you should precede the `@printindex' command with a suitable section or chapter command (usually `@unnumbered') to supply the chapter heading and put the index into the table of contents. Precede the `@unnumbered' command with an `@node' line. For example: @node Variable Index, Concept Index, Function Index, Top @comment node-name, next, previous, up @unnumbered Variable Index @printindex vr @node Concept Index, , Variable Index, Top @comment node-name, next, previous, up @unnumbered Concept Index @printindex cp @summarycontents @contents @bye (Readers often prefer that the concept index come last in a book, since that makes it easiest to find.) Generating a Table of Contents ============================== The `@chapter', `@section', and other structuring commands supply the information to make up a table of contents, but they do not cause an actual table to appear in the manual. To do this, you must use the `@contents' and `@summarycontents' commands: `@contents' Generate a table of contents in a printed manual, including all chapters, sections, subsections, etc., as well as appendices and unnumbered chapters. (Headings generated by the `@heading' series of commands do not appear in the table of contents.) The `@contents' command should be written on a line by itself. `@shortcontents' `@summarycontents' (`@summarycontents' is a synonym for `@shortcontents'; the two commands are exactly the same.) Generate a short or summary table of contents that lists only the chapters (and appendices and unnumbered chapters). Omit sections, subsections and subsubsections. Only a long manual needs a short table of contents in addition to the full table of contents. Write the `@shortcontents' command on a line by itself right *before* the `@contents' command. The table of contents commands automatically generate a chapter-like heading at the top of the first table of contents page. Write the table of contents commands at the very end of a Texinfo file, just before the `@bye' command, following any index sections--anything in the Texinfo file after the table of contents commands will be omitted from the table of contents. When you print a manual with a table of contents, the table of contents are printed last and numbered with roman numerals. You need to place those pages in their proper place, after the title page, yourself. (This is the only collating you need to do for a printed manual. The table of contents is printed last because it is generated after the rest of the manual is typeset.) Here is an example of where to write table of contents commands: INDICES... @shortcontents @contents @bye Since an Info file uses menus instead of tables of contents, the Info formatting commands ignore the `@contents' and `@shortcontents' commands. `@bye' File Ending ================== An `@bye' command terminates TeX or Info formatting. None of the formatting commands see any of the file following `@bye'. The `@bye' command should be on a line by itself. If you wish, you may follow the `@bye' line with notes. These notes will not be formatted and will not appear in either Info or a printed manual; it is as if text after `@bye' were within `@ignore' ... `@end ignore'. Also, you may follow the `@bye' line with a local variables list. *Note Using Local Variables and the Compile Command: Compile-Command, for more information. Chapter Structuring ******************* The "chapter structuring" commands divide a document into a hierarchy of chapters, sections, subsections, and subsubsections. These commands generate large headings; they also provide information for the table of contents of a printed manual (*note Generating a Table of Contents: Contents.). The chapter structuring commands do not create an Info node structure, so normally you should put an `@node' command immediately before each chapter structuring command (*note Nodes::.). The only time you are likely to use the chapter structuring commands without using the node structuring commands is if you are writing a document that contains no cross references and will never be transformed into Info format. It is unlikely that you will ever write a Texinfo file that is intended only as an Info file and not as a printable document. If you do, you might still use chapter structuring commands to create a heading at the top of each node--but you don't need to. Tree Structure of Sections ========================== A Texinfo file is usually structured like a book with chapters, sections, subsections, and the like. This structure can be visualized as a tree (or rather as an upside-down tree) with the root at the top and the levels corresponding to chapters, sections, subsection, and subsubsections. Here is a diagram that shows a Texinfo file with three chapters, each of which has two sections. Top | ------------------------------------- | | | Chapter 1 Chapter 2 Chapter 3 | | | -------- -------- -------- | | | | | | Section Section Section Section Section Section 1.1 1.2 2.1 2.2 3.1 3.2 In a Texinfo file that has this structure, the beginning of Chapter 2 looks like this: @node Chapter 2, Chapter 3, Chapter 1, top @chapter Chapter 2 The chapter structuring commands are described in the sections that follow; the `@node' and `@menu' commands are described in following chapters. (*Note Nodes::, and see *Note Menus::.) Types of Structuring Command ============================ The chapter structuring commands fall into four groups or series, each of which contains structuring commands corresponding to the hierarchical levels of chapters, sections, subsections, and subsubsections. The four groups are the `@chapter' series, the `@unnumbered' series, the `@appendix' series, and the `@heading' series. Each command produces titles that have a different appearance on the printed page or Info file; only some of the commands produce titles that are listed in the table of contents of a printed book or manual. * The `@chapter' and `@appendix' series of commands produce numbered or lettered entries both in the body of a printed work and in its table of contents. * The `@unnumbered' series of commands produce unnumbered entries both in the body of a printed work and in its table of contents. The `@top' command, which has a special use, is a member of this series (*note `@top': makeinfo top.). * The `@heading' series of commands produce unnumbered headings that do not appear in a table of contents. The heading commands never start a new page. * The `@majorheading' command produces results similar to using the `@chapheading' command but generates a larger vertical whitespace before the heading. * When an `@setchapternewpage' command says to do so, the `@chapter', `@unnumbered', and `@appendix' commands start new pages in the printed manual; the `@heading' commands do not. Here are the four groups of chapter structuring commands: No new pages Numbered Unnumbered Lettered and numbered Unnumbered In contents In contents In contents Not in contents @top @majorheading @chapter @unnumbered @appendix @chapheading @section @unnumberedsec @appendixsec @heading @subsection @unnumberedsubsec @appendixsubsec @subheading @subsubsection @unnumberedsubsubsec @appendixsubsubsec @subsubheading `@top' ====== The `@top' command is a special sectioning command that you use only after an `@node Top' line at the beginning of a Texinfo file. The `@top' command tells the `makeinfo' formatter which node is the `Top' node. It has the same typesetting effect as `@unnumbered' (*note `@unnumbered': (`@appendix')unnumbered & appendix.). For detailed information, see *Note The `@top' Command: makeinfo top command. `@chapter' ========== `@chapter' identifies a chapter in the document. Write the command at the beginning of a line and follow it on the same line by the title of the chapter. For example, this chapter in this manual is entitled "Chapter Structuring"; the `@chapter' line looks like this: @chapter Chapter Structuring In TeX, the `@chapter' command creates a chapter in the document, specifying the chapter title. The chapter is numbered automatically. In Info, the `@chapter' command causes the title to appear on a line by itself, with a line of asterisks inserted underneath. Thus, in Info, the above example produces the following output: Chapter Structuring ******************* Texinfo also provides a command `@centerchap', which is analogous to `@unnumbered', but centers its argument in the printed output. This kind of stylistic choice is not usually offered by Texinfo. `@unnumbered', `@appendix' ========================== Use the `@unnumbered' command to create a chapter that appears in a printed manual without chapter numbers of any kind. Use the `@appendix' command to create an appendix in a printed manual that is labelled by letter instead of by number. For Info file output, the `@unnumbered' and `@appendix' commands are equivalent to `@chapter': the title is printed on a line by itself with a line of asterisks underneath. (*Note `@chapter': chapter.) To create an appendix or an unnumbered chapter, write an `@appendix' or `@unnumbered' command at the beginning of a line and follow it on the same line by the title, as you would if you were creating a chapter. `@majorheading', `@chapheading' =============================== The `@majorheading' and `@chapheading' commands put chapter-like headings in the body of a document. However, neither command causes TeX to produce a numbered heading or an entry in the table of contents; and neither command causes TeX to start a new page in a printed manual. In TeX, an `@majorheading' command generates a larger vertical whitespace before the heading than an `@chapheading' command but is otherwise the same. In Info, the `@majorheading' and `@chapheading' commands are equivalent to `@chapter': the title is printed on a line by itself with a line of asterisks underneath. (*Note `@chapter': chapter.) `@section' ========== In a printed manual, an `@section' command identifies a numbered section within a chapter. The section title appears in the table of contents. In Info, an `@section' command provides a title for a segment of text, underlined with `='. This section is headed with an `@section' command and looks like this in the Texinfo file: @section @code{@@section} To create a section, write the `@section' command at the beginning of a line and follow it on the same line by the section title. Thus, @section This is a section produces This is a section ================= in Info. `@unnumberedsec', `@appendixsec', `@heading' ============================================ The `@unnumberedsec', `@appendixsec', and `@heading' commands are, respectively, the unnumbered, appendix-like, and heading-like equivalents of the `@section' command. (*Note `@section': section.) `@unnumberedsec' The `@unnumberedsec' command may be used within an unnumbered chapter or within a regular chapter or appendix to provide an unnumbered section. `@appendixsec' `@appendixsection' `@appendixsection' is a longer spelling of the `@appendixsec' command; the two are synonymous. Conventionally, the `@appendixsec' or `@appendixsection' command is used only within appendices. `@heading' You may use the `@heading' command anywhere you wish for a section-style heading that will not appear in the table of contents. The `@subsection' Command ========================= Subsections are to sections as sections are to chapters. (*Note `@section': section.) In Info, subsection titles are underlined with `-'. For example, @subsection This is a subsection produces This is a subsection -------------------- In a printed manual, subsections are listed in the table of contents and are numbered three levels deep. The `@subsection'-like Commands =============================== The `@unnumberedsubsec', `@appendixsubsec', and `@subheading' commands are, respectively, the unnumbered, appendix-like, and heading-like equivalents of the `@subsection' command. (*Note `@subsection': subsection.) In Info, the `@subsection'-like commands generate a title underlined with hyphens. In a printed manual, an `@subheading' command produces a heading like that of a subsection except that it is not numbered and does not appear in the table of contents. Similarly, an `@unnumberedsubsec' command produces an unnumbered heading like that of a subsection and an `@appendixsubsec' command produces a subsection-like heading labelled with a letter and numbers; both of these commands produce headings that appear in the table of contents. The `subsub' Commands ===================== The fourth and lowest level sectioning commands in Texinfo are the `subsub' commands. They are: `@subsubsection' Subsubsections are to subsections as subsections are to sections. (*Note `@subsection': subsection.) In a printed manual, subsubsection titles appear in the table of contents and are numbered four levels deep. `@unnumberedsubsubsec' Unnumbered subsubsection titles appear in the table of contents of a printed manual, but lack numbers. Otherwise, unnumbered subsubsections are the same as subsubsections. In Info, unnumbered subsubsections look exactly like ordinary subsubsections. `@appendixsubsubsec' Conventionally, appendix commands are used only for appendices and are lettered and numbered appropriately in a printed manual. They also appear in the table of contents. In Info, appendix subsubsections look exactly like ordinary subsubsections. `@subsubheading' The `@subsubheading' command may be used anywhere that you need a small heading that will not appear in the table of contents. In Info, subsubheadings look exactly like ordinary subsubsection headings. In Info, `subsub' titles are underlined with periods. For example, @subsubsection This is a subsubsection produces This is a subsubsection ....................... `@raisesections' and `@lowersections' ===================================== The `@raisesections' and `@lowersections' commands raise and lower the hierarchical level of chapters, sections, subsections and the like. The `@raisesections' command changes sections to chapters, subsections to sections, and so on. The `@lowersections' command changes chapters to sections, sections to subsections, and so on. An `@lowersections' command is useful if you wish to include text that is written as an outer or standalone Texinfo file in another Texinfo file as an inner, included file. If you write the command at the beginning of the file, all your `@chapter' commands are formatted as if they were `@section' commands, all your `@section' command are formatted as if they were `@subsection' commands, and so on. `@raisesections' raises a command one level in the chapter structuring hierarchy: Change To @subsection @section, @section @chapter, @heading @chapheading, etc. `@lowersections' lowers a command one level in the chapter structuring hierarchy: Change To @chapter @section, @subsection @subsubsection, @heading @subheading, etc. An `@raisesections' or `@lowersections' command changes only those structuring commands that follow the command in the Texinfo file. Write an `@raisesections' or `@lowersections' command on a line of its own. An `@lowersections' command cancels an `@raisesections' command, and vice versa. Repeated use of the commands continue to raise or lower the hierarchical level a step at a time. An attempt to raise above `chapters' reproduces chapter commands; an attempt to lower below `subsubsections' reproduces subsubsection commands. Nodes ***** "Nodes" are the primary segments of a Texinfo file. They do not themselves impose a hierarchic or any other kind of structure on a file. Nodes contain "node pointers" that name other nodes, and can contain "menus" which are lists of nodes. In Info, the movement commands can carry you to a pointed-to node or to a node listed in a menu. Node pointers and menus provide structure for Info files just as chapters, sections, subsections, and the like, provide structure for printed books. Two Paths ========= The node and menu commands and the chapter structuring commands are independent of each other: * In Info, node and menu commands provide structure. The chapter structuring commands generate headings with different kinds of underlining--asterisks for chapters, hyphens for sections, and so on; they do nothing else. * In TeX, the chapter structuring commands generate chapter and section numbers and tables of contents. The node and menu commands provide information for cross references; they do nothing else. You can use node pointers and menus to structure an Info file any way you want; and you can write a Texinfo file so that its Info output has a different structure than its printed output. However, most Texinfo files are written such that the structure for the Info output corresponds to the structure for the printed output. It is not convenient to do otherwise. Generally, printed output is structured in a tree-like hierarchy in which the chapters are the major limbs from which the sections branch out. Similarly, node pointers and menus are organized to create a matching structure in the Info output. Node and Menu Illustration ========================== Here is a copy of the diagram shown earlier that illustrates a Texinfo file with three chapters, each of which contains two sections. Note that the "root" is at the top of the diagram and the "leaves" are at the bottom. This is how such a diagram is drawn conventionally; it illustrates an upside-down tree. For this reason, the root node is called the `Top' node, and `Up' node pointers carry you closer to the root. Top | ------------------------------------- | | | Chapter 1 Chapter 2 Chapter 3 | | | -------- -------- -------- | | | | | | Section Section Section Section Section Section 1.1 1.2 2.1 2.2 3.1 3.2 Write the beginning of the node for Chapter 2 like this: @node Chapter 2, Chapter 3, Chapter 1, top @comment node-name, next, previous, up This `@node' line says that the name of this node is "Chapter 2", the name of the `Next' node is "Chapter 3", the name of the `Previous' node is "Chapter 1", and the name of the `Up' node is "Top". *Please Note:* `Next' refers to the next node at the same hierarchical level in the manual, not necessarily to the next node within the Texinfo file. In the Texinfo file, the subsequent node may be at a lower level--a section-level node may follow a chapter-level node, and a subsection-level node may follow a section-level node. `Next' and `Previous' refer to nodes at the *same* hierarchical level. (The `Top' node contains the exception to this rule. Since the `Top' node is the only node at that level, `Next' refers to the first following node, which is almost always a chapter or chapter-level node.) To go to Sections 2.1 and 2.2 using Info, you need a menu inside Chapter 2. (*Note Menus::.) You would write the menu just before the beginning of Section 2.1, like this: @menu * Sect. 2.1:: Description of this section. * Sect. 2.2:: @end menu Write the node for Sect. 2.1 like this: @node Sect. 2.1, Sect. 2.2, Chapter 2, Chapter 2 @comment node-name, next, previous, up In Info format, the `Next' and `Previous' pointers of a node usually lead to other nodes at the same level--from chapter to chapter or from section to section (sometimes, as shown, the `Previous' pointer points up); an `Up' pointer usually leads to a node at the level above (closer to the `Top' node); and a `Menu' leads to nodes at a level below (closer to `leaves'). (A cross reference can point to a node at any level; see *Note Cross References::.) Usually, an `@node' command and a chapter structuring command are used in sequence, along with indexing commands. (You may follow the `@node' line with a comment line that reminds you which pointer is which.) Here is the beginning of the chapter in this manual called "Ending a Texinfo File". This shows an `@node' line followed by a comment line, an `@chapter' line, and then by indexing lines. @node Ending a File, Structuring, Beginning a File, Top @comment node-name, next, previous, up @chapter Ending a Texinfo File @cindex Ending a Texinfo file @cindex Texinfo file ending @cindex File ending The `@node' Command =================== A "node" is a segment of text that begins at an `@node' command and continues until the next `@node' command. The definition of node is different from that for chapter or section. A chapter may contain sections and a section may contain subsections; but a node cannot contain subnodes; the text of a node continues only until the next `@node' command in the file. A node usually contains only one chapter structuring command, the one that follows the `@node' line. On the other hand, in printed output nodes are used only for cross references, so a chapter or section may contain any number of nodes. Indeed, a chapter usually contains several nodes, one for each section, subsection, and subsubsection. To create a node, write an `@node' command at the beginning of a line, and follow it with four arguments, separated by commas, on the rest of the same line. These arguments are the name of the node, and the names of the `Next', `Previous', and `Up' pointers, in that order. You may insert spaces before each pointer if you wish; the spaces are ignored. You must write the name of the node, and the names of the `Next', `Previous', and `Up' pointers, all on the same line. Otherwise, the formatters fail. (*note info: (info)Top, for more information about nodes in Info.) Usually, you write one of the chapter-structuring command lines immediately after an `@node' line--for example, an `@section' or `@subsection' line. (*Note Types of Structuring Command: Structuring Command Types.) *Please note:* The GNU Emacs Texinfo mode updating commands work only with Texinfo files in which `@node' lines are followed by chapter structuring lines. *Note Updating Requirements::. TeX uses `@node' lines to identify the names to use for cross references. For this reason, you must write `@node' lines in a Texinfo file that you intend to format for printing, even if you do not intend to format it for Info. (Cross references, such as the one at the end of this sentence, are made with `@xref' and its related commands; see *Note Cross References::.) Choosing Node and Pointer Names ------------------------------- The name of a node identifies the node. The pointers enable you to reach other nodes and consist of the names of those nodes. Normally, a node's `Up' pointer contains the name of the node whose menu mentions that node. The node's `Next' pointer contains the name of the node that follows that node in that menu and its `Previous' pointer contains the name of the node that precedes it in that menu. When a node's `Previous' node is the same as its `Up' node, both node pointers name the same node. Usually, the first node of a Texinfo file is the `Top' node, and its `Up' and `Previous' pointers point to the `dir' file, which contains the main menu for all of Info. The `Top' node itself contains the main or master menu for the manual. Also, it is helpful to include a brief description of the manual in the `Top' node. *Note First Node::, for information on how to write the first node of a Texinfo file. How to Write an `@node' Line ---------------------------- The easiest way to write an `@node' line is to write `@node' at the beginning of a line and then the name of the node, like this: @node NODE-NAME If you are using GNU Emacs, you can use the update node commands provided by Texinfo mode to insert the names of the pointers; or you can leave the pointers out of the Texinfo file and let `makeinfo' insert node pointers into the Info file it creates. (*Note Texinfo Mode::, and *Note makeinfo Pointer Creation::.) Alternatively, you can insert the `Next', `Previous', and `Up' pointers yourself. If you do this, you may find it helpful to use the Texinfo mode keyboard command `C-c C-c n'. This command inserts `@node' and a comment line listing the names of the pointers in their proper order. The comment line helps you keep track of which arguments are for which pointers. This comment line is especially useful if you are not familiar with Texinfo. The template for a node line with `Next', `Previous', and `Up' pointers looks like this: @node NODE-NAME, NEXT, PREVIOUS, UP If you wish, you can ignore `@node' lines altogether in your first draft and then use the `texinfo-insert-node-lines' command to create `@node' lines for you. However, we do not recommend this practice. It is better to name the node itself at the same time that you write a segment so you can easily make cross references. A large number of cross references are an especially important feature of a good Info file. After you have inserted an `@node' line, you should immediately write an @-command for the chapter or section and insert its name. Next (and this is important!), put in several index entries. Usually, you will find at least two and often as many as four or five ways of referring to the node in the index. Use them all. This will make it much easier for people to find the node. `@node' Line Tips ----------------- Here are three suggestions: * Try to pick node names that are informative but short. In the Info file, the file name, node name, and pointer names are all inserted on one line, which may run into the right edge of the window. (This does not cause a problem with Info, but is ugly.) * Try to pick node names that differ from each other near the beginnings of their names. This way, it is easy to use automatic name completion in Info. * By convention, node names are capitalized just as they would be for section or chapter titles--initial and significant words are capitalized; others are not. `@node' Line Requirements ------------------------- Here are several requirements for `@node' lines: * All the node names for a single Info file must be unique. Duplicates confuse the Info movement commands. This means, for example, that if you end every chapter with a summary, you must name each summary node differently. You cannot just call each one "Summary". You may, however, duplicate the titles of chapters, sections, and the like. Thus you can end each chapter in a book with a section called "Summary", so long as the node names for those sections are all different. * A pointer name must be the name of a node. The node to which a pointer points may come before or after the node containing the pointer. * You cannot use any of the Texinfo @-commands in a node name; @-commands confuse Info. Thus, the beginning of the section called `@chapter' looks like this: @node chapter, unnumbered & appendix, makeinfo top, Structuring @comment node-name, next, previous, up @section @code{@@chapter} @findex chapter * You cannot use commas, colons, or apostrophes within a node name; these confuse TeX or the Info formatters. For example, the following is a section title: @code{@@unnumberedsec}, @code{@@appendixsec}, @code{@@heading} The corresponding node name is: unnumberedsec appendixsec heading * Case is significant. The First Node -------------- The first node of a Texinfo file is the `Top' node, except in an included file (*note Include Files::.). The `Top' node (which must be named `top' or `Top') should have as its `Up' and `Previous' nodes the name of a node in another file, where there is a menu that leads to this file. Specify the file name in parentheses. If the file is to be installed directly in the Info directory file, use `(dir)' as the parent of the `Top' node; this is short for `(dir)top', and specifies the `Top' node in the `dir' file, which contains the main menu for Info. For example, the `@node Top' line of this manual looks like this: @node Top, Overview, (dir), (dir) (You may use the Texinfo updating commands or the `makeinfo' utility to insert these `Next' and `(dir)' pointers automatically.) *Note Install an Info File::, for more information about installing an Info file in the `info' directory. The `Top' node contains the main or master menu for the document. The `@top' Sectioning Command ----------------------------- A special sectioning command, `@top', has been created for use with the `@node Top' line. The `@top' sectioning command tells `makeinfo' that it marks the `Top' node in the file. It provides the information that `makeinfo' needs to insert node pointers automatically. Write the `@top' command at the beginning of the line immediately following the `@node Top' line. Write the title on the remaining part of the same line as the `@top' command. In Info, the `@top' sectioning command causes the title to appear on a line by itself, with a line of asterisks inserted underneath. In TeX and `texinfo-format-buffer', the `@top' sectioning command is merely a synonym for `@unnumbered'. Neither of these formatters require an `@top' command, and do nothing special with it. You can use `@chapter' or `@unnumbered' after the `@node Top' line when you use these formatters. Also, you can use `@chapter' or `@unnumbered' when you use the Texinfo updating commands to create or update pointers and menus. The `Top' Node Summary ---------------------- You can help readers by writing a summary in the `Top' node, after the `@top' line, before the main or master menu. The summary should briefly describe the document. In Info, this summary will appear just before the master menu. In a printed manual, this summary will appear on a page of its own. If you do not want the summary to appear on a page of its own in a printed manual, you can enclose the whole of the `Top' node, including the `@node Top' line and the `@top' sectioning command line or other sectioning command line between `@ifinfo' and `@end ifinfo'. This prevents any of the text from appearing in the printed output. (*note Conditionally Visible Text: Conditionals.). You can repeat the brief description from the `Top' node within `@iftex' ... `@end iftex' at the beginning of the first chapter, for those who read the printed manual. This saves paper and may look neater. You should write the version number of the program to which the manual applies in the summary. This helps the reader keep track of which manual is for which version of the program. If the manual changes more frequently than the program or is independent of it, you should also include an edition number for the manual. (The title page should also contain this information: see *Note `@titlepage': titlepage.) Creating Pointers with `makeinfo' ================================= The `makeinfo' program has a feature for automatically creating node pointers for a hierarchically organized file that lacks them. When you take advantage of this feature, you do not need to write the `Next', `Previous', and `Up' pointers after the name of a node. However, you must write a sectioning command, such as `@chapter' or `@section', on the line immediately following each truncated `@node' line. You cannot write a comment line after a node line; the section line must follow it immediately. In addition, you must follow the `Top' `@node' line with a line beginning with `@top' to mark the `Top' node in the file. *Note `@top': makeinfo top. Finally, you must write the name of each node (except for the `Top' node) in a menu that is one or more hierarchical levels above the node's hierarchical level. This node pointer insertion feature in `makeinfo' is an alternative to the menu and pointer creation and update commands in Texinfo mode. (*Note Updating Nodes and Menus::.) It is especially helpful to people who do not use GNU Emacs for writing Texinfo documents. Menus ***** "Menus" contain pointers to subordinate nodes.(1) (*note Menus-Footnotes::) In Info, you use menus to go to such nodes. Menus have no effect in printed manuals and do not appear in them. By convention, a menu is put at the end of a node since a reader who uses the menu may not see text that follows it. A node that has a menu should *not* contain much text. If you have a lot of text and a menu, move most of the text into a new subnode--all but a few lines. (1) Menus can carry you to any node, regardless of the hierarchical structure; even to nodes in a different Info file. However, the GNU Emacs Texinfo mode updating commands work only to create menus of subordinate nodes. Conventionally, cross references are used to refer to other nodes. Menus Need Short Nodes ====================== A reader can easily see a menu that is close to the beginning of the node. The node should be short. As a practical matter, you should locate a menu within 20 lines of the beginning of the node. Otherwise, a reader with a terminal that displays only a few lines may miss the menu and its associated text. The short text before a menu may look awkward in a printed manual. To avoid this, you can write a menu near the beginning of its node and follow the menu by an `@node' line, and then an `@heading' line located within `@ifinfo' and `@end ifinfo'. This way, the menu, `@node' line, and title appear only in the Info file, not the printed document. For example, the preceding two paragraphs follow an Info-only menu, `@node' line, and heading, and look like this: @menu * Menu Location:: Put a menu in a short node. * Writing a Menu:: What is a menu? * Menu Parts:: A menu entry has three parts. * Less Cluttered Menu Entry:: Two part menu entry. * Menu Example:: Two and three part entries. * Other Info Files:: How to refer to a different Info file. @end menu @node Menu Location, Writing a Menu, , Menus @ifinfo @heading Menus Need Short Nodes @end ifinfo The Texinfo file for this document contains more than a dozen examples of this procedure. One is at the beginning of this chapter; another is at the beginning of the "Cross References" chapter. Writing a Menu ============== A menu consists of an `@menu' command on a line by itself followed by menu entry lines or menu comment lines and then by an `@end menu' command on a line by itself. A menu looks like this: @menu Larger Units of Text * Files:: All about handling files. * Multiples: Buffers. Multiple buffers; editing several files at once. @end menu In a menu, every line that begins with an `* ' is a "menu entry". (Note the space after the asterisk.) A line that does not start with an `* ' may also appear in a menu. Such a line is not a menu entry but is a menu comment line that appears in the Info file. In the example above, the line `Larger Units of Text' is a menu comment line; the two lines starting with `* ' are menu entries. The Parts of a Menu =================== A menu entry has three parts, only the second of which is required: 1. The menu entry name. 2. The name of the node (required). 3. A description of the item. The template for a menu entry looks like this: * MENU-ENTRY-NAME: NODE-NAME. DESCRIPTION Follow the menu entry name with a single colon and follow the node name with tab, comma, period, or newline. In Info, a user selects a node with the `m' (`Info-menu') command. The menu entry name is what the user types after the `m' command. The third part of a menu entry is a descriptive phrase or sentence. Menu entry names and node names are often short; the description explains to the reader what the node is about. The description, which is optional, can spread over two or more lines. A useful description complements the node name rather than repeats it. Less Cluttered Menu Entry ========================= When the menu entry name and node name are the same, you can write the name immediately after the asterisk and space at the beginning of the line and follow the name with two colons. For example, write * Name:: DESCRIPTION instead of * Name: Name. DESCRIPTION You should use the node name for the menu entry name whenever possible, since it reduces visual clutter in the menu. A Menu Example ============== A menu looks like this in Texinfo: @menu * menu entry name: Node name. A short description. * Node name:: This form is preferred. @end menu This produces: * menu: * menu entry name: Node name. A short description. * Node name:: This form is preferred. He